MEADOC MULTIFIT Sealing insert – hermetically tight
- 40 mm thick rubber element between two stainless steel plates
- Suitable up to 1 bar infiltrating water pressure
- For core holes or casings with an inside diameter of 100 mm
- Precise adjustment of the fluid to be conveyed to the seal area
- High flexibility due to onion rings in 2 to 4 mm steps
Product Description
-
Watertight installation
The MEADOC MULTIFIT sealing insert can be used to lay gas, water or sewer pipes and cables water pressure-tight through a core hole or a casing with a diameter of 100 mm. The inside diameter can be adjusted precisely by removing the inner onion rings. MEADOC MULTIFIT is suitable for pipes and cables with any diameter from 20 to 65 mm. A water-tight seal is achieved simply by tightening the screws.
-
Patented sealing profile
MEADOC pipe ducts have a patented sealing profile with a sealing effect that intensifies as the concrete sets. All products are manufactured in accordance with DIN EN 1401-1 and can therefore be connected to any standard pipes.
MEA Building Systems is the only manufacturer of pipe ducts to offer a separate form element conforming to DIN EN 1401-1 for a nominal width of 100 mm. The high quality and one hundred per cent functionality of MEADOC pipe ducts have also been confirmed by several independent test institutes.