Light wells Light well attachments

Attachment for GRP light well MEAMULTINORM

The height of MEAMULTINORM light wells can be adjusted by using top elements featuring variable height adjustability.

• Variable height adjustment
• Available in 4 widths from 80 cm to 150 cm
• Extension with up to three extensions per light well possible (up to five extensions are possible for the reinforced versions)
• When using more than one extension per light well, stiffening frames are mandatory
• Suitable fastening sets available (please use the fastening set suitable for the respective insulation thickness)
• Thermal bridge-free installation when using the MEAFIX mounting insulation board

Intermediate element for the height-adjustable GRP light well MEAMAX

The MEAMAX light well range features integrated height adjustability by up to 25 cm. By installing a MEAMAX intermediate element, the total height can be increased by another 35 cm.

• Up to three intermediate elements can be installed per light well
• Available in three sizes
• Suitable fastening sets available (please order a separate fastening set for each insulation thickness)
• Thermal bridge-free installation when used with the MEAFIX insulated mounting panel

PVC attachment MEAFLEX for light wells

The MEAFLEX PVC attachment for light wells is a consistent further development of the robust steel attachment, but offers flexible adjustment in the overall height of 12.8 – 32.8 cm.

The PVC attachment MEAFLEX is particularly suitable for 4-sided repaving in the accessible area and makes the edge of the light well disappear. Possible applications are e.g. at patio doors or in front of front doors.

• Total height 32.8 cm
• Height can be shortened on-site to max. 12.8 cm
• Installation without drilling (the attachment is simply glued into the fold)
• Shortening possible on-site (as well as any angle up to 5°)
• Stackable (maximum of three units)

Steel attachment for concrete light wells

• Available in 2 version: 7,8 cm height ( + 5 cm heightening) or 12,8 cm ( + 10 cm heightening)
• Screwless fastening
• Passenger car passable til 9,0 kN

Concrete attachment for concrete light wells

The concrete top element for MEAVECTOR makes it easy to raise the light well heights ( +10, 15 or 20 cm). Our top element perfectly fit into the light well hinge. You only need to put it on top and you are ready to go. Additional sizes for raising the light well up to 40 cm are available on demand.

• For heights adaptation: + 10, 15 or 20 cm
• Inside rabbet
• Suitable gratings available (separate ordering necessary)

MEASTAHLFLEX attachment for concrete light wells

The new MEASTAHLFLEX attachment allows MEAVECTOR light wells to be raised individually and offers continuous, flexible height adjustment from 16.5 cm to 23 cm from the top edge of the light well.

Thanks to the galvanized cover plate, the attachment blends seamlessly into the paved surface, so that the concrete edge of the base body is no longer visible after installation. With a maximum recommended slope of approx. 2.5°, the attachment is ideal for various structural requirements. In addition, the 4- or 3-sided attachment is compatible with both walkable and driveable grates and can be installed with or without an internal rebate.

• Light well attachment made of hot-dip galvanized attachment frame with internal grate
• Infinitely height-adjustable for flexible terrain adaptation
• Variably adjustable from 16.5 to 23 cm for different installation heights
• Adjustable on slopes for precise adaptation
• High load capacity up to 10 kN Suitable for vehicle traffic (tested by the Kiwa testing institute)
• Frame variants: open to the wall (3-sided frame) or surrounding (4-sided frame)