Point drainage MEADRAIN EN

Point drainage made of polymer concrete

Product details
Tunnel infiltration trench MEASTORM

For rainwater retention and infiltration

Product details
MEADOC KG 2000

Sturdy pipe duct with patented sealing effect provides high chemical resistance

Product details
MEALÜFT AIR Window

Controlled basement ventilation - without opening the window

Product details
MEAMODUL for cantilever shelves

The ideal solution for cantilever racks and extra deep pallet racks

Product details
New
MEADRAIN DMD

MEADRAIN DMD drainage channel with rubber seal ensures watertight drainage

Product details
MEALON

Easy to install and low maintenance allrounder for any construction project

Product details
MEALÜFT AIR Wall

Humidity-controlled fan solution for an optimal room climate

Product details
MEALIT

Optimal ventilation and permanent protection for basements

Product details
Steps MEASTEP XXL

Extra large step system

Product details
MEAVARIO

Variable window desings respond to all expectations

Product details
MEADRAIN S

Drainage channel (with/without slope) made of polymer concrete (E 600)

Product details
MEAFRAME for MEATHERMO

Perimeter masking frame for MEATHERMO casement windows

Product details
MEADRAIN EN/ENS

Drainage channels (with/without slope) made of polymer concrete for loading classes F 900

Product details
New
MEATEC II

MEATEC II drainage system for terraces and facades

Product details

SMART DRAINAGE SOLUTION FOR HIGH LOAD AREAS

Industrial companies and logistics centers require individual solutions on the one hand, but also meet numerous norms and regulations on the other – and all of this in the most economical way possible. Structural solutions must guarantee safety, functionality and flexibility in equal measure in order to maximize productivity in the long term. MEA provides flexible and economical systems as well as innovative construction solutions for the interior design of industrial companies and logistics centers that meet the highest demands.

Drainage systems for industrial buildings and logistics halls

 

The drainage of logistics and industrial areas, both inside and outside, presents specific challenges due to the heavy loads, large volumes of water runoff, and the potential presence of chemicals or oils. Proper drainage is critical to ensure safety, protect infrastructure, and comply with environmental regulations.

Indoor and Outdoor Drainage Requirements for Logistics and Industrial Areas

Outdoor areas include loading docks, storage yards, truck parking lots, and access roads. Indoor areas can include factory floors, warehouses, and maintenance areas. Both types of environments require efficient water management to prevent flooding, reduce hazards, and handle potentially contaminated water.

Regulations and Standards

  1. Local Building Codes and Environmental Regulations
    • These regulations often dictate stormwater management, especially for large sealed surfaces where runoff must be managed to avoid overloading public drainage systems.
    • Specific provisions are often required for the handling of hazardous materials, preventing contaminated water from entering the local ecosystem.
  2. EN 1433 Standard (Europe)
    • This European standard covers linear drainage channels, specifying the structural and hydraulic requirements for drainage systems, including load-bearing capacities, making it particularly relevant for logistics and industrial areas that experience heavy vehicle traffic.
  3. Stormwater Management Regulations
    • Sustainable Drainage Systems (SuDS) or equivalent systems encourage using permeable surfaces, infiltration systems, and methods for controlling runoff, especially in areas where sealed surfaces are extensive.
  4. Water Quality Regulations
    • In many regions, regulations require the separation or treatment of water before it enters public drainage systems to prevent contaminants, such as oils or chemicals from industrial processes, from causing environmental damage.

Best Practices for Draining Large Sealed Surfaces

  1. Linear Drainage Systems
    • Large sealed surfaces in logistics and industrial areas require linear drainage systems to channel surface water efficiently and prevent pooling, which could compromise safety or disrupt operations.
    • Load-bearing capacities are crucial, particularly in outdoor areas where heavy trucks or machinery operate, so drainage systems must withstand high dynamic and static loads.
  2. Infiltration and Filtration
    • Integrating systems that allow water to infiltrate the ground can reduce surface water runoff. Where contamination is a risk, filtration systems should be used to treat water before it is discharged into public drainage systems.
  3. Regular Maintenance
    • Drainage systems in industrial and logistics areas require regular maintenance to prevent blockages from debris, chemicals, or other materials.

MEA Drainage Solutions for Logistics and Industrial Areas

The specific needs of these areas are addressed by MEA’s range of drainage products, which offer solutions for both high-load areas and places exposed to harsh conditions.

  1. MEADRAIN EN/ENS
    • Designed for heavy-duty use, these drainage channels are ideal for outdoor loading docks, access roads, and truck parking areas, where their high load-bearing capacity (up to Class F900) is essential. These systems ensure efficient water removal, preventing pooling that could damage vehicles or infrastructure.
  2. MEADRAIN DM
    • MEADRAIN DM channels are built for areas that experience high mechanical loads. Their design makes them well-suited for outdoor areas with constant truck movement, such as loading bays or industrial storage yards.
  3. MEACRET LINE
    • This solution is excellent for areas requiring high durability and ease of maintenance. The MEACRET LINE system’s robust performance makes it ideal for both outdoor logistics zones and high-traffic industrial sites.
  4. MEARIN EXPERT and MEARIN PLUS
    • These SMC (Sheet Molding Compound) channels are lightweight, making them easy to install, while still offering a high degree of durability and chemical resistance. MEARIN systems are especially valuable for areas where exposure to oils or chemicals is common, such as warehouses or industrial facilities with large machinery.
  5. MEATEC II
    • This System as been specifically designed to protect buildings, facades and terrasses from waterlogging. The MEATEC II is also particularly suited for barrier-free installations.
  6. MEASTORM
    • MEASTORM is designed to handle large volumes of water, making it the perfect solution for logistics and industrial areas that face heavy rainfall or large surface runoff. This system provides quick evacuation of water from sealed surfaces, reducing the risk of flooding or operational delays.

Drainage Inside Industrial Buildings

Inside logistics and industrial buildings, drainage systems are needed to manage water from cleaning processes, leaks, or machinery operations. Efficient indoor drainage also helps prevent water-related damage and maintains a safe environment for workers.

  • MEARIN PLUS and MEARIN EXPERT channels, due to their chemical resistance and easy installation, are perfect for indoor settings where exposure to corrosive substances or oils is a concern.
  • In manufacturing facilities or warehouses, these channels help manage not only water but also the potential spills from chemicals or oils, ensuring compliance with environmental and safety regulations.

Drainage Around Industrial Buildings

The areas surrounding logistics and industrial buildings, including access roads and truck parking zones, require systems capable of handling heavy traffic and large amounts of surface water.

  • MEADRAIN EN/ENS and MEADRAIN DM offer robust solutions for high-load zones, while MEASTORM ensures that water is effectively managed in large outdoor areas during heavy rainfall.